HUS 1-3/4 x 9-1/2 galvanized face-mount joist hanger. For 1-3/4 x 9-1/2 engineered wood. Provides support underneath the joist rafter or beam. The double-shear design ensures a strong durable connection which is designed for greater strength with fewer fasteners to install. Features double-shear nailing which distributes the load through two points on each joist nail for greater strength and allows for the use of fewer nails faster installation and the use of standard nails for all connections.
The HUS is designed for applications where higher loads are needed.
Simpson Strong-Tie HUS1.81/10 - 1-3/4 x 9-1/2 Face Mount Hanger
Simpson Strong-Tie Single 7-in x 9-1/2-in 14-Gauge G90
Simpson Strong-Tie HUS1.81/10 1-3/4 x 9 Double Shear Joist Hanger
Simpson Strong-Tie Single 7-in x 9-1/2-in 14-Gauge G90 Galvanized
Simpson Strong-Tie ITS1.81/9.5 sets a new standard for engineered wood top flange hangers. The ITSITS1.81/9.5 installs 1-3/4 x 9-1/2 I-Joists faster and uses less nails than any other EWP top flange hanger. The new Strong-Grip seat and Funnel Flange features allow standard joist installation without requiring joist nails resulting in the lowest installed cost.
Simpson Strong-Tie ITS1.81/9.5 Top Flange I-Joist Hanger
Simpson Strong-Tie ITS1.81/9.5 sets a new standard for engineered wood top flange hangers. The ITSITS1.81/9.5 installs 1-3/4 x 9-1/2 I-Joists faster and uses less nails than any other EWP top flange hanger. The new Strong-Grip seat and Funnel Flange features allow standard joist installation without requiring joist nails resulting in the lowest installed cost.
Simpson Strong-Tie ITS1.81/9.5 Top Flange I-Joist Hanger
Simpson Strong-Tie connectors make projects easier to build while making them stronger and safer. They are engineered and tested to perform and are manufactured to the highest quality standards. Whether working on a home project or building a structure to comply with building codes, go with the choice of engineers and contractors, go with genuine Simpson Strong-Tie connectors.
Simpson Strong Tie HU14 14-Gauge Face Mount Joist Hanger
All hangers in this series have double shear nailing - an innovation that distributes the load through 2 points on each joist nail for greater strength. This allows for fewer nails, faster installation, and the use of all common nails for the same connection. Nails must be driven at an angle through the joist or truss into the header to achieve the table loads. Not designed for welded or nailer applications. Galvanized. 14-gauge.
Simpson Strong-Tie HHUS Joist Hanger
HUS 1-3/4 x 9-1/2 galvanized face-mount joist hanger. For 1-3/4 x 9-1/2 engineered wood. Provides support underneath the joist rafter or beam. The double-shear design ensures a strong durable connection which is designed for greater strength with fewer fasteners to install. Features double-shear nailing which distributes the load through two points on each joist nail for greater strength and allows for the use of fewer nails faster installation and the use of standard nails for all connections.
Simpson Strong-Tie Hus Joist Hanger, HUS1.81/10